Reface Kitchen Cabinets With Wall Molding
Provide a different look to cabinets with wall molding of nearly any type. An inset or recessed panel design is how this method known. Make more expensive look to your cabinets by installing an edge of molding around side-jambs and doors for added depth. You can reface kitchen cabinets considerably in just one day.
Before reface kitchen cabinets, use a screwdriver to take out the doors from the cabinets with the hinges left on the doors. Take out the drawers. Take size the edge around the bare sides and ends of the cabinets. Working from corner to corner, take size the edge of all door. The front of the cabinets or drawers will not be added molding, just to the faces of the doors and sides of the cabinets.
Cutting and installing
The next step to reface kitchen cabinets is using a miter saw blade to cut a piece of molding for each measurement at 45-degrees. Cut pieces of molding at the long points of the cut pieces. Stick the pieces of molding evenly the length of the side of the cabinet with glue. Level the mitered end with the corners. Use a pin nailer at each end with one pin nail. Repeat this step for the next piece. Form a 90-degree corner to fit the mitered ends jointly. In the same way, form an edge frame following the front of the cabinet with the next pieces on the cabinet.
Fit tightly and squarely the mitered corners, tap jointly a little if necessary. Complete fasten the molding to the side of the cabinet with pin nails gapping the pin nails 3 inches separately into all piece of molding. Create frames around all doors by installing the selected pieces to each door with glue and nails. Fill wood dough with a putty knife into small cracks and all holes. Smooth all the edges with 100-grit sandpaper Sand. Complete reface kitchen cabinets by painting or staining the molding matching the decor.